EDGE Gas Lens 1718 Series

The most common size hand torch that this kit fits is the 17, 18, 26.

The EDGE Gas Lens 1718 Series comes in a variety of options to ensure you receive exactly what you need. From individual cups to kits to replacement parts, we’ve got whatever you need.

Guidelines to get started…

EDGE ADAPTER AND EDGE CUP MUST BE FULLY SEATED ONTO THE TEFLON HEAT SHIELD FOR SAFETY PROPER GAS FLOW.

GL920, GL1718, CB920. CB1718 (P4-10)

*We recommend DC only, 180 amp unless using pulse settings.

*Can be used with any size and type electrode.

*Best used with metals such as Stainless steel, Titanium and Inconel.

*Aluminum based material should use with #10 or #12 in shorter runs

*We do not recommend walking the cup with Pyrex glass cup. (This will cause premature failure)

GL920-P12, GL920-P15 AND GL920-18

*We recommend DC only, 180 amp unless using pulse settings.

*Best used with metals such as: Stainless steel, Titanium, Inconel,Nickel based & thin aluminum based.

*Recommended use with 1/8, 3/32 and 1/16 (2.4) electrode. 1/16 diffuser must not exceed 90A DC because of potential

damage to diffuser.

*The tungsten can be extended up to 3” out in controlled environment for clearance.

*We do not recommend walking the Pyrex glass cup. (This will cause premature failure.)

GL920 QUARTZ CUPS

*Can be used with any metals

*We recommend DC only up to 350A

*Can be used with any size tungsten unless using diffuser technology.

*All sizes of cups can be used with EDGE diffuser technology.

If you have a 17, 18, 26 series torch, with the EDGE conversion, you have access to the full extensive line of EDGE Gas Lens 920 Series.

Simply replace your existing gas lens with a series 4 gas lens, this will allow you access to the 920 stubby (standard) cups series,  XL Series, and XXL Series.

Need to speak with us before placing your order?

You’ve come to the right place. Use the form to your right and we’ll be in touch shortly.

Send us mail